SW18AV2
New
SW18AV2
Description
18”, Direct Radiating, Powered, CORE Processed, Subwoofer
- Model: SW18AV2
- Weight: 46.00Kg
- EAN: 8032496918615
- This product has a minimum quantity of 1
The SW18AV2 is a compact and powerful subwoofer that provides extended low frequency response for specific models in the ED series of high performance point source loudspeakers.
The 18” low frequency driver is a high power transducer equipped with a moisture resistant glass fibre reinforced cone. The double centering spider ensures that the 4” voice coil always remains centered in the magnetic gap even under high excursion conditions. The 15mm phenolic birch plywood cabinet is provided with a 35mm pole mount socket to allow two-way ED series loudspeakers to be mounted above on standard speaker poles. Recessed handles are provided for easy lifting and handing, and the included polyurethane wheels aid transportation, while stacking feet and matching recesses enable secure ground stacks.
SW18AV2 represents the evolution of SW18A, with which it maintains full electroacoustic and mechanical compatibility.
SYSTEM PROCESSING
The system processing is based on the CORE2 DSP platform designed by the PROEL R&D Laboratories using one of the most advanced SHARC DSP for audio application. It features 40bit floating point resolution and top quality 24bit AD/DA converters for perfect signal integrity, dynamic range in excess of 110dB, and superior sonic performance. Thanks to its massive processing power, the CORE2 platform is capable of providing the most sophisticated algorithms for speaker processing, together with remote control and networking capability.
The PRONET AX control software, working on a solid and reliable CANBUS based network protocol, provides an intuitive interface for the remote control of the whole system, with the possibility of EQing, delaying, managing the protection functions, and monitoring the status of the amplifier.
POWER AMPLIFIER
The SW18AV2 is powered by a new generation of CLASS D power amplifiers with digitally-controlled SMPS and latest generation single-stage PFC. The innovative technology used for these amplifiers offers performances at the top of the range, such as a superior sound definition at any audio frequency, very high dynamics also for low level signals and very low distortion even at the maximum power. The superior sound quality can be compared with top-of-the-range AB-class analog systems, while the SW18AV2 power modules feature a higher dynamics, very compact size and light weight and efficiency above 90%.
The power module employed for powering the SW18AV2 delivers in an ultra-compact package a total power of 2800W to the LF driver. Such a large reserve of power means that the amplifier can handle very high voltage peaks, resulting in an impressive dynamic performance.
- Compact powered subwoofer
- 40 bit floating point CORE2 processing with PRONET AX remote control
- Digitally controlled Class D amplifier module with SMPS and PFC
- 18” woofer, 4” voice coil
- Water repellant cone
- Heavy duty wheels
- Pole mount socket
SYSTEM | |
System’s Acoustic Principle | Direct radiation, vented |
Frequency Response (-6dB) | 36 Hz - 100 Hz (Processed) |
Maximum (peak) Output | 132 dB SPL @ 1m |
TRANSDUCERS | |
Type | 18", 4" VC |
Cone | High stiffness, water repellent, glass fiber reinforced diaphragm |
Voice Coil Type | Flux Demodulating Ring |
Suspension | Double Centering Spider |
ELECTRICAL | |
Input Impedance | 20 kΩ balanced, 10 kΩ unbalanced |
Input Sensitivity | +4dBu / 1.25 V |
Signal Processing | CORE2 processing, 40bit floating point SHARC DSP, 24 bit AD/DA converters |
Direct access Controls | 4 Presets (STANDARD/INFRASUB/CARDIOID/USER), Network Termination, GND Link |
Remote Controls | PRONET AX control software |
Network protocol | CANBUS |
Amplifier Type | Class D with SMPS and PFC |
Output Power | 2800W |
Mains Voltage Range (Vac) | 100 - 240 V~ ±10% 50/60 Hz |
IN / OUT Connectors | Neutrik XLR-M / XLR-F |
IN / OUT Network Connectors | ETHERCON®(NE8FAV) |
Mains Input Connector | PowerCon® (NAC3MPA) |
Mains Link Connector | PowerCon® (NAC3MPB) |
Cooling | Variable speed DC fan |
ENCLOSURE & CONSTRUCTION | |
Width | 650 mm |
Height | 500 mm |
Depth | 564 mm |
Depth Including Wheels | 673 mm |
Enclosure Material | 15mm, reinforced phenolic birch |
Paint | High resistance, water based paint |
Wheels | 4 x 100mm Polyurethane Wheels |
Net Weight | 42.5 kg (93.7 lbs) |