Menu
Your Cart

SW36XFAV2

SW36XFAV2
SW36XFAV2
SW36XFAV2
SW36XFAV2
SW36XFAV2
New
SW36XFAV2
SW36XFAV2
SW36XFAV2
SW36XFAV2
SW36XFAV2
SW36XFAV2

Description

Dual 18" (460mm), Very High Output, Manifolded Bandpass, Powered, CORE Processed, Flyable Subwoofer

  • Model: SW36XFAV2
  • Weight: 106.00Kg
  • EAN: 8032496918622
  • This product has a minimum quantity of 1
Compare this Product

The SW36XFAV2 subwoofer is designed to deliver high quality low frequency reproduction where very high output is a key requirement, together with well defined deep bass response and fast transient response. Its compact size and light weight make it suitable for several different uses, ranging from touring applications to fixed installations and high-level dance clubs. SW36XFAV2 represents the evolution of SW36XFA, with which it maintains full electroacoustic and mechanical compatibility.

DESCRIPTION
The SW36XFAV2 is a very high quality powered subwoofer system featuring some of the most advanced technologies for low frequency reproduction. Its unique and innovative design is based on a configuration that can be defined as Manifolded Band Pass. It uses manifolding of the front side of the cones to maximize the mutual coupling between the two drivers. This innovative configuration does not use any large resonant cavity to load the speaker, but very compact cavities in order to obtain advantages in terms of definition, both at the lowest end and the upper bass.

TRANSDUCERS
The SW36XFAV2 subwoofer system is equipped with two high power 18” (460mm) transducers capable of very long excursion (up to 30mm peak-to-peak) and featuring a a large displacement suspension system. These transducers use Tetracoil technology, where two different, axially separated magnetic gaps and two inside-outside 100mm (4” ) diameter voice coils are wound on the same former and suspended evenly in the two magnetic gaps. This creates an equivalent voice coil diameter greater than 6”, resulting in a larger heat dissipation area for and increased power handling. Additional key advantages of the Tetracoil technology are also minimized distortion and a very symmetric and flat inductance curve.  Cones are made of very high-stiffness fiberglass reinforced paper, featuring also invisible water repellent treatment.

PERFORMANCES
The SW36XFAV2 represents an innovative subwoofer design that features unprecedented performances in terms of low frequency definition and “punchy” feeling in the upper bass range.  The combination of accuracy in acoustic transient response together with the use of latest technology in transducers linearity, signal processing and power amplifiers allows the SW36XFAV2 to deliver unprecedented low frequency reproduction quality with solid deep end, together with very fast and accurate bass response.

SIGNAL PROCESSING and POWER AMPLIFIERS
The system processing is based on the CORE2 DSP platform designed by the PROEL R&D Laboratories using one of the most advanced SHARC DSP for audio application. It features 40bit floating point resolution and top-quality 24bit AD/DA converters, for a perfect signal integrity, a dynamic range in excess of 110dB and a superior sonic performance. Thanks to its massive processing power, the CORE2 platform is capable of providing the most sophisticated algorithms for speaker processing, together with remote control and networking capability. The PRONET AX control software, working on a solid and reliable CANBUS based network protocol, provides an intuitive interface for the remote control of the whole system, with the possibility of eqing, delaying, increasing the protections and monitoring the status of the amplifier.
The SW36XFAV2 is powered by a new generation of CLASS D power amplifiers with digitally-controlled SMPS and latest generation single-stage PFC. The innovative technology used for these amplifiers offers performances at the top of the range, such as a superior sound definition at any audio frequency, very high dynamics also for low level signals and very low distortion even at the maximum power. The superior sound quality can be compared with top-of-the-range AB-class analog systems, while the SW36XFAV2 power modules feature a higher dynamics, very compact size and light weight and efficiency above 90%. The power module employed for powering the SW36XFAV2 delivers in an ultra-compact package a maximum power of 4000W and features PFC (Power Factor Correction), a technology able to guarantee always the highest level of power regardless of any eventual fluctuations of the power supply.

  • Very High Output
  • Compact size for a very good output-to-weight ratio
  • Manifolded Band Pass configuration for a high output in a compact size
  • High-strength, water repellent, glass fiber reinforced cones
  • Tetracoil dual voice coil for extended linear response and increased power handling
  • 40 bit floating point CORE processing with PRONET remote control
  • Digitally controlled Class D amplifier module with SMPS and PFC
SYSTEM
System’s Acoustic PrincipleManifolded Band Pass
Frequency Response (±3dB)36 Hz  –  100 Hz    (Processed)
Maximum Peak SPL @ 1m143 dB 
TRANSDUCERS
TypeTwo 18” (460mm), 4” (100mm) VC 
ConeWater repellent cone and epoxy coated plates
Voice Coil Type100mm (4in) Tetracoil® dual voice coil, equivalent to a single coil diameter larger than 152mm (>6in)
SuspensionUltra linear suspension behavior
ELECTRICAL
Input Impedance20 kΩ balanced, 10 kΩ unbalanced
Input Sensitivity +4dBu / 1.25 V
Signal ProcessingCORE2 processing, 40bit floating point SHARC DSP, 24 bit  AD/DA converters
Direct access Controls4 Presets (Standard/InfraSub/Cardioid/ User), Network Termination, GND Link
Remote ControlsPRONET AX control software
Network protocolCANBUS 
Amplifier TypeClass D with SMPS and PFC
Output Power2000 W + 2000 W
Mains Voltage Range (Vac)100 - 240 V~ ±10% 50/60 Hz
IN / OUT ConnectorsNeutrik XLR-M / XLR-F
IN / OUT Network ConnectorsETHERCON®(NE8FAV)
Mains ConnectorPowerCon TRUE1 (NAC3PX In/Out)
CoolingVariable speed DC fan
ENCLOSURE & CONSTRUCTION
Physical Dimensions
W x H x D746 mm (29.4”) x 795 mm (31.3”) x 710 mm (27.9”)
Depth Including Wheels838 mm (32.9”)
Enclosure Material15mm, reinforced phenolic birch
PaintHigh resistance, water based paint
Wheels4 heavy-load 100 mm ø
Net Weight91.2 Kg (201.1 lbs.) without wheels
X